Skip to main content
Add Me To Your Mailing List
Not editable in Design Mode. Switch to HTML mode
Click Here to visit our New Clothing Store
How to use the Forums as ListServ Emails
Click Here To Learn How
Welcome to the Club Photo Albums Page. By default only the most recently updated photos are shown in the list below. To see all photo albums click on the Search Looking Glass icon to the right and change your selection.
Share This Page
Share this page on Facebook
Share this page on Linkedin
Share this page on Twitter
Switch To Threaded View
Return to Forum
Losing 8.50 x 6 Tire on Takeoff in Wichita
7/23/2003 3:11 PM
Cracker, It was a paved and wide runway at a large airport. Luckily Yingling Aircraft parts was right there too.
If you don't have a locking tailwheel, I suggest you get one. All taildraggers I have flown larger than a Skywagon have one and tailwheel locks and their use are normal ops in warbirds. I think the Skywagon is right at the cusp in size where they should be required and used.
2/8/2003 10:23 PM
having completed the above, successfully, grass or tar????
hints for those of us without a locking tailwheel?
2/6/2003 9:08 PM
While at the Skywagon Convention in Wichita, I had a sudden flat (valve stem failed) on my 8.50 x 6 tire during takeoff just after the tail was airborne and "ready to fly". I had enough airspeed to easily lift and hold the wheel up, would have to land somewhere, sometime, and Yinglings was just across the wide runway. I let the big, LOCKED, XP tailwheel back down first, held full elevator back pressure and slowed to where I could no longer hold the tire aloft. When it came down, my McCauley 3 piece wheel flew apart shearing the brake caliper with it, and the rotor disc also separated by shearing the attachment bolts. Heavy counter braking, and the locked tailwheel with full back pressure kept us on the runway, stopping on the shoulder. The tower kept the runway open to allow the 65 Skywagons lined up behind me to take off, often with the passengers waving as they went off to the scheduled breakfast. I was left to fix the damage alone, using the Yingling hangar and replaced both wheels and brakes with 3 bolt, two piece Clevelands. During that evening's cocktail hour I was informed by many about the danger of using the three piece wheels. I think a 'technical critique" session should be held at all Skywagon fly-ins so that the old timers can help with suggestions to newbies about what should be done to their aircraft.
In spite of saving the Avemco insurance company from repairing a groundloop, they insisted on increasing my rates as I used their money in my claim to buy the new wheels. I now insure through Bill White and preach the importance of locking the tailwheel for any take-off or landing, and am thankful for the added grip of the big XP tailwheel.
Return to Forum